Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
10. Connect the evaporator discharge line.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
2
Connect the evaporator discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
11. Install the windshield washer reservoir cover.
1
Install the windshield washer reservoir cover.
2
Install the screws.
12. Install the oil fill pipe.
1
Install the oil fill pipe.
2
Install the screw.
13. Install the battery tray.
