Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner outlet tube. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the Exhaust Gas Recirculation (EGR) vacuum regulator solenoid.
1. Disconnect the electrical connector.
2. Disconnect the vacuum lines.
3. Remove the bolts (nuts if applicable).
INSTALLATION
1. To install, reverse the removal procedure.
