Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
20. Connect the following electrical connectors:
^
DPFE transducer
^
Engine vacuum regulator sensor
21. Connect the fuel lines.
22. NOTE: Typical is shown.
Position the brake booster vacuum hose bracket and install the nut.
23. NOTE: Typical is shown.
Position the accelerator cable bracket and install the bolts.
24. NOTE: Typical is shown.
Connect the throttle body control linkage by connecting the (A) accelerator cable, (B) speed control actuator cable and (C) throttle control return
spring.
