Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
1. Position the exhaust inlet pipe, new exhaust gasket and exhaust hanger bracket.
2. Install the exhaust hanger insulator brackets and nuts.
CAUTION: To prevent damage to the exhaust hanger insulator, do not lubricate with oil or grease-based lubricants.
3. NOTE: A soap-and-water solution will ease the installation of the exhaust insulators.
Install the exhaust hanger insulators.
4. Install the LH and RH nuts.
5. Connect the heated oxygen sensor electrical connectors.
