ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Standard A/C|Page 5543 > < Standard A/C
Page 2
background image

6. Disconnect the A/C cycling switch electrical connector.

7. Remove the suction accumulator/drier.

1

Remove the screws.

2

Remove the suction accumulator/drier.

8. Remove the A/C cycling switch.

INSTALLATION

1. Service the new suction accumulator/drier with the correct amount of PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent

meeting Ford specification WSH-M1C231-B. See: Service and Repair/Refrigerant Oil Addition

2. Install the A/C cycling switch.

^

Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-l9589-DA, or equivalent meeting Ford specification
WSH-MIC231-B.

Standard A/C|Page 5543 > < Standard A/C