Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
4. Install the evaporator core housing support bracket and screws.
5. Connect the condenser core refrigerant lines.
1
Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-M1C231-B and install the O-rings.
2
Connect the condenser to evaporator tube.
3
Connect the compressor discharge line.
6. Connect the condenser to evaporator tube.
1
Connect the condenser to evaporator tube.
NOTE: Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-MIC231-B.
2
Install the O-rings.
3
Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
