Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Transmission Position Switch/Sensor: Service and Repair
4R70W
Special Tools
1. Raise and support vehicle.
2. Disconnect the transmission shift cable.
3. Disconnect the digital TR electrical connector.
4. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the nut.
2
Remove the lever.
5. Loosen the bolts.
6. NOTE: The manual control lever must be in the NEUTRAL position.