ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - CNG Rear High Pressure Fuel Line Inspection|Page 3289 > < Recall - CNG Rear High Pressure Fuel Line Inspection|Page 3287
Page 3
background image

^

Enter claims using Direct Warranty Entry (DWE).

^

If the vehicle is involved with both 04E09 and 04E10, each program must be claimed separately

^

Refund or related damage must be claimed on a repair line that is separate from the repair line on which the FSA is claimed.

^

"MT" labor should be submitted on a separate repair line with the related damage flag checked.

^

Refer to ACESII manual for claims preparation and submission information.

Attachment II - Labor Allowances and Parts Ordering Information

LABOR ALLOWANCES

PARTS REQUIREMENTS/ORDERING INFORMATION

Parts will not be direct shipped for this recall. Order parts through normal order processing channels

DEALER PRICE

For latest prices, refer to DOES II

PARTS RETENTION AND RETURN

Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures".

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.

Attachment III - Technical Information

OVERVIEW

This program involves installing a hard nylon sleeve to protect the rear high pressure fuel line from any possible future abrasion caused by contact with
the brake line. If the fuel line is found to be leaking, it must be replaced.

If the fuel line needs to be replaced on a vehicle equipped with a 4th fuel tank (located inside the vehicle), the original fuel line will be replaced with two
separate lines.

NOTE

Recall - CNG Rear High Pressure Fuel Line Inspection|Page 3289 > < Recall - CNG Rear High Pressure Fuel Line Inspection|Page 3287