Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
3. Lift up on End Play Checking Tool and note the dial indicator reading.
^
If the reading exceeds end play limits, replace the torque converter.
4. Remove the dial indicator and tool.
Leakage Checks
1. Clean the outside surface of the torque converter.
2. Install Torque Converter Leak Check Tool and Gasket into convert hub.
3. WARNING: Always follow proper safety procedures while using press.
Install the torque converter with the installed leak check tool into the Arbor press.
Secure the press. Apply enough force from the press to seal tool into the torque converter.
4. NOTE: Use clean dry shop air.