Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
11. Tighten all the accumulator body, the upper and the lower control body and the solenoid body nuts and bolts.
12. NOTE: Prior to installation, lightly lubricate the seal with clean MERCON(R) V Transmission Fluid XT-5-QM or equivalent meeting
MERCON(R) V specification.
Press the fluid filter and seal assembly into the pump bore until seated.
13. NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan. The fluid pan gasket is reusable if not damaged.
Position the (A) gasket onto the cleaned fluid pan. Make sure the (B) magnet is positioned over the dimple in the fluid pan.
14. Install the (A) pan with the gasket. Alternately tighten the (B) bolts.
