Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
13. NOTE: During assembly, make sure the holes of the differential pinion thrust washers and differential pinion gears are lined up exactly with those
of the differential case.
Assemble the differential pinion thrust washers into the differential case.
^
Use a very small screwdriver to push the washers into place.
14. Remove the special tools from the differential
15. Install the differential pinion shaft in the differential case. Install the differential pinion shaft lock pin.
16. Install the ring gear to the differential case.
Model 70
Disassembly
NOTE: When the axle lubricant has been drained for rear axle repair (limited slip only), refill the rear axle with the specified quantity of Premium
Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C197-A and add 0.163 L (5.5 ounces) of Ford Friction
Modifier C8AZ-19B546-A or equivalent friction modifier meeting Ford specification EST-M2C118-A.
