Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Assemble the clutch pack plates for the button half of the differential case. Align the clutch pressure plate lugs, and install into the differential
case.
4. Assemble the pinions and gears inside the differential case.
^
Place the differential pinion shaft and differential pinion gears with the markings on the button half of the differential case.
^
Install the other differential pinion shaft and differential pinion gears on the flange half of the differential case. Align the markings.
5. Assemble the differential case.
1
Place the button half of the differential case over the assembly. Align differential case marks.
2
NOTE: The bolts must be clean and dry.
Install the differential case bolts and turn each one on a few threads.
3
With the axle shafts in position, tighten the differential case bolts evenly and alternately to specification. If bolt heads have "180" or seven