Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Slip Yoke: Service and Repair
Special Tools
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vise or similar holding fixture.
Remove the driveshaft slip-yoke boot.
1
With the front driveshaft on a bench, cut and discard the driveshaft slip-yoke boot clamps.
2
Separate the driveshaft slip-yoke from the splined stub shaft on the driveshaft.
2. Remove the driveshaft slip-yoke boot.
^
Inspect the driveshaft slip-yoke boot for damage and install new if required.
3. Inspect the lubricant for contamination. If contaminated, disassemble the driveshaft and inspect the stub shaft and driveshaft slip-yoke for wear.
Install new components as needed.
Assembly