Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Seat Latch: Service and Repair
REMOVAL
1. Remove the appropriate rear bench or bucket seat.
NOTE
-
The following procedure applies to both rear bucket and rear bench seats.
-
The removal procedure is similar for all of the rear seat back latch strikers.
2. Remove the bolts and washers retaining the rear seat back latch striker to the floorpan.
-
For the extended wagon fifth row bench seat, remove the retaining nuts (not shown).
3. Remove the rear seat back latch striker.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: Seal all bolt locations with a 0.19-mm (0.007-inch) bead of Caulking Cord D6AZ-19560-A or equivalent sealant meeting Ford
specification ESB-M4G32-A.