Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
5. NOTE: Plug each port of the Hydraulic Control Unit (HCU) to prevent brake fluid from spilling.
Disconnect the brake lines.
1. Remove the 7/16-24 brake lines.
2. Disconnect the 1/2-20 brake lines.
6. Disconnect the anti-lock brake control module electrical connector.
1. Lift the lock tab upward.
2. Disconnect the anti-lock brake control module electrical connector.
7. Remove the HCU bracket to inner fender well nuts.
8. Remove the HCU.
1. Disconnect the anti-lock brake control module electrical connectors.
2. Remove the HCU.