Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Wheel Speed Sensor: Service and Repair
Rear Antilock Brake System
Removal
1. Raise and support vehicle.
2. NOTE: Clean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal.
Remove the rear anti-lock brake sensor.
1. Disconnect the rear anti-lock brake sensor electrical connector.
2. Remove the bolt.
3. Remove the rear anti-lock brake sensor.
Installation
1. NOTE: Inspect the anti-lock brake sensor 0-ring for damage; lightly lubricate 0-ring with High Performance Rear Axle Lubricant F1TZ-19580-B
or equivalent meeting Ford specification WSL-M2C192-A.
To install, reverse the removal procedure.
