Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
9. Pull the seal from the A/C compressor.
INSTALLATION
1. Clean the A/C compressor nose area.
CAUTION: Do not allow dirt or other foreign materials to enter the A/C compressor.
2. Place the shaft seal on the Seal Protector. Lubricate the shaft seal and the Seal Protector with PAG compressor oil, Motorcraft YN-12c,
F7AZ-19589-DA, or equivalent meeting Ford specification WSH-MIC231-B.
3. Position the shaft seal and the Seal Protector over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the Shaft Seal Installer until seated.
