ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid - A/T|4R70W|Page 1365 > < Fluid - A/T|4R70W|Page 1363
Page 5
background image

7. Install the (A) pan with gasket. Alternately tighten the (B) bolts.

8. Connect the connector.
9. Remove the supports and lower the vehicle.

10. Connect the battery ground cable.

11. CAUTION:  Use only MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON(R) V specification. The use of

any other fluids can result in the transmission failing to operate in a normal manner or failure.

Refill the transmission.
1

Add 6.2 liters (6.5 quarts) of MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON(R) V specification.
to the transmission through the fluid filler tube.

2

Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.

3

Check and adjust the transmission fluid, in 0.24-liter (0.5-pint) increments, to the proper level (cross-hatched area of the fluid level indicator at
normal operating temperature.

Fluid - A/T|4R70W|Page 1365 > < Fluid - A/T|4R70W|Page 1363