Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
NOTE:
Do not final tighten the axle shaft bolts at this time.
18.
Position a new gasket onto the axle shaft, then install the axle shaft.
19.
Install the brake caliper anchor plate and brake caliper assembly. Tighten bolts to 173 Nm (128 lb-ft).
20.
Install the rear tire and wheel assemblies.
21.
Lower the vehicle.
22.
Tighten the lug nuts to 200 Nm (148 lb-ft).
23.
Tighten rear axle shaft bolts to 138 Nm (102 lb-ft).
NOTE:
Install one (1) ounce of Additive Friction Modifier C8AZ-19B546-A to axles equipped with limited-slip differential assemblies.
24.
Check and top off the rear axle with SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL.
