Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Throttle Cable/Linkage: Service and Repair
Accelerator Cable Bracket
REMOVAL
1. Remove the engine Air Cleaner (ACL) and the outlet tube.
2. Depress the tab and remove the accelerator control splash shield.
3. Remove the accelerator cable from the throttle body cam.
4. Remove the accelerator cable from the accelerator cable bracket.
^
Compress the retaining tabs and remove the accelerator cable from the accelerator cable bracket.
5. If equipped, remove the speed control actuator cable.
^
Disconnect the speed control actuator cable from the throttle body cam lever.
^
Compress the retaining tabs on the speed control actuator cable and remove the speed control actuator cable from the accelerator cable bracket.
