Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Keyless Entry Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the body side trim finish panel.
1
Remove the three finish panel pushpins.
2
Remove the finish panel from the body side.
3. Remove the remote keyless entry module.
1
Disconnect the electrical connectors.
2
Remove the two nuts.
3
Remove the module.
INSTALLATION
1. To install, reverse the removal procedure.
^
If installing a new module it is necessary to reprogram Remote Key less Entry Transmitters.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
