Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
6. Loosen the pinch bolt. Remove the adjuster out of the axle.
7. Install the new service adjuster. Orient the slot as noted in Step 5.
1. Position the new adjuster as specified in the chart.
2. Tighten the pinch bolt.
8. Install the front wheel.
9. Lower the front end.
10. Check the alignment. If not at optimal caster/camber specification, additional adjustment of the rotational orientation of the adjuster is required.
11. Once optimal caster/camber has been achieved, reset the toe and clear vision to optimal settings.
