Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
6. Tighten the radius arm-to-axle nut and bolt to specification.
7. Tighten the rear radius arm nut to specification.
8. Install the front coil spring.
9. NOTE: Tighten the ball joint nut further, if necessary, in order to insert the new cotter pin.
Install the front wheel spindle in the front axle.
1. Position the front wheel spindle in the front axle.
2. Install the ball joint nut.
3. Install the new cotter pin.
