Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
6.
Mount the hub in a vise, then place a mark on the disc and the hub as a reference for reassembling. See Figure 5.
CAUTION
The disc is attached to the hub with external Torx(R) bolts and requires an E18 external Torx(R) socket.
7.
Separate the disc from the hub. See Figure 5.
NOTE:
New rear hub seals must be installed when the rear hub is removed.
8.
Remove the rear hub seal and inner bearing. See Figure 5.
