Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Seals and Gaskets: Service and Repair
4R70W
Special Tools
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. NOTE: To maintain initial driveshaft balance, mark the driveshaft yoke and axle flange so they will be installed in their original positions.
Remove the drive shaft.
4. Remove the vehicle speed sensor (VSS).
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the VSS.