Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Special Tools
1. Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.
2. Install the Converter Clutch Torquing Tool in the converter pump drive.
3. Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
^
The converter one-way clutch should lock up and hold the specified torque.
^
The torque converter one-way clutch should rotate freely in the clockwise direction.
^
Try the clutch for lockup and hold in at least five positions.
^
If the clutch fails to lock up and hold the specified torque, replace the torque converter
