Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
7. Connect the molded lead frame to the solenoids.
^
Connect the bulkhead inter connector.
^
Connect the electronic pressure control (EPC) solenoid.
^
Connect the torque converter clutch (TCC).
^
Connect the shift solenoid SSA and SSB.
8. CAUTION: If installing a new filter, and the grommet remains in the main control bore, carefully use a small screwdriver to remove the
grommet. Use care not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and seal.
Replace fluid filter and seal as required.
9. Position the pan magnet into the transmission fluid pan.
10. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage; if not damaged, reuse the gasket.
