Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Position the special tool, and inspect ring gear backlash and ring gear backface runout.
5. CAUTION: Mark the position of the bearing caps as arrows may not be visible. The bearing caps must be installed in their identical locations and
positions.
Loosen the differential case.
1
Remove the bolts.
2
Remove the bearing caps.
6. To simplify removal, fabricate two differential case retaining straps from metal stock as shown.
7. WARNING: Be careful not to allow the differential case to fall.
CAUTION: Place a wood block between the pry bar and the rear axle housing to protect the machined surface from damage.
Use the pry bar and the wood block to remove the differential case from the rear axle housing.
