Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Place the base portion of the special tool in a vise. Install the differential clutch pack and differential side gear (without the shim) on the gauge.
4. Position the special tool hand-tight on top of the differential clutch pack.
5. Install the special tool over the disc and differential clutch pack.
6. Install the nut of the gauge over the top and base stud.
7. Use the Feeler Gauge and select the thickest blade that will enter between the tool and the differential clutch pack. The reading will be the
thickness of the new clutch shim.
8. Remove the special tool from the clutch pack and side gear assembly.
