Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
Seals and Gaskets: Service and Repair
Ford
8.8 Inch Ring Gear
Special Tools
Removal
1. Remove the pinion flange.
2. Using a screwdriver, force the metal flange of the rear axle drive pinion seal up and strike with a hammer. Install gripping pliers and remove.
Installation
1. Lubricate the new rear axle drive pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a new
seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.
9.75 Inch Ring Gear