Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
13. Disconnect the heater blower motor switch resistor electrical connector.
14. Remove the screws and the evaporator core housing support bracket.
15. Remove the evaporator core housing.
1. Remove the seven nuts.
2. Remove the evaporator core housing.
NOTE: The use of an assistant may be necessary to remove the evaporator core housing.
INSTALLATION
1. Install the evaporator core housing.
1. Install the evaporator core housing.
2. Install the seven nuts.
NOTE: The use of an assistant may be necessary for the installation of the evaporator core housing.
