Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
Injector Control Pressure Regulator: Service and Repair
INJECTION CONTROL PRESSURE (ICP) REGULATOR
Removal
1. Remove the fuel/water separator, refer to See: Fuel/Water Separator/Service and Repair
2. Remove the plug from the high pressure oil pump reservoir. Remove the oil from the high pressure oil pump reservoir using Rotunda Vacuum
Tester (014-R-1058) or equivalent.
3. Disconnect wire connector from injection control pressure solenoid.
4. Remove nut securing injection control pressure solenoid to injection pressure regulator.
