Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
Camshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. On vehicles equipped with dual batteries, refer to battery.
CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.
2. Disconnect the wiring at the Camshaft Position sensor (CMP sensor).
3. Remove the retaining bolt and the sensor.
installation
1. Follow the removal procedure in reverse order.
NOTE: On vehicles equipped with dual batteries, refer to battery for battery reconnect procedure.
