Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
1. Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification shown in image(s).
Rear Seats
Safety Belt Bolt Bit
Special Tool(s) Required
Removal
1. On a rear safety belt retractor and tongue with a flip-up shoulder strap guide cover, remove the shoulder strap guide as follows.
1. Lift the shoulder strap guide cover.
2. Use the Safety Belt Bolt Bit to remove the bolt.
3. Remove the shoulder strap guide.
