Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
Ignition Switch Lock Cylinder: Service and Repair
Replacement, Functional
REMOVAL
NOTE: The following procedure applies to vehicles that have functional lock cylinders and keys. If key numbers are known, the proper key can be
made.
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
(1) Position the lock cylinder to RUN.
(2) Using a suitable tool, push upward on the cylinder release tab through the hole in the lower shroud while pulling the cylinder outward.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Verify ignition switch lock cylinder operation.