Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
NOTE: Apply petroleum jelly to the EPC check ball spring prior to installing it into the case.
4. Position the valve body separator plate and the gaskets to the case carefully, to retain the check balls.
5. Install the separator plate reinforcing plate.
1. Install the separator plate reinforcing plate.
2. Install the retaining bolts.
NOTE: The word UP stamped on the separator plate reinforcing plate must be visible when installed,
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. Install the solenoid body assembly.
1. Install the solenoid body assembly.
2. Install the nut.
3. Install the bolts and nut finger-tight.
