ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - 4R100 Flexplate Replacement Precaution|Page 5303 > < Single Cardan, Flange Yoke - Disassembly and Assembly|Page 5298
Page 1
background image

Flex Plate: Technical Service Bulletins
A/T - 4R100 Flexplate Replacement Precaution

Article No.
99-23-6

11/15/99

TRANSMISSION - 4R100 - FLEXPLATE
REPLACEMENT - VEHICLES WITH 7.3L DIESEL
ENGINE - SERVICE TIP

FORD:
1994-1997 F SUPER DUTY, F-250 HD, F-350
1994-1999 ECONOLINE
1999 SUPER DUTY F SERIES

ISSUE
The transmission adapter may cause a misalignment between the flexplate and torque converter causing a pre-load condition between the two
components. This concern arises during a transmission flexplate replacement.

ACTION
Inspect and replace (if necessary) the flexplate reinforcement plate and crankshaft spacer when replacing the flexplate. In addition, replace the engine
spacer during this procedure. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

NOTE

THIS PROCEDURE SHOULD BE USED FOR BROKEN/CRACKED AUTOMATIC TRANSMISSION FLEXPLATES. THIS PROCEDURE IS
PARTICULARLY IMPORTANT FOR VEHICLES WHICH HAVE SHOWN REPEAT FAILURES AND/OR LOW MILEAGE FAILURES.

1.

Inspect the flywheel reinforcement plate for damage. The plate should be flat and free of any galling. Replace Flywheel Reinforcement Plate
(F4TZ-6A366-A) if damaged.

2.

Inspect the crankcase spacer for damage. The spacer should be flat and free of any galling. Replace Crankcase Spacer (F81Z-6A366-AA) if
damaged.

3.

Replace the Engine Spacer (F4TZ-6A369-A).

4.

Install the crankshaft spacer and flexplate reinforcement plate (less flexplate) with the flexplate attachment bolts. Tighten to specification. The
crankshaft spacer and reinforcement plate should be firmly secured and bolts seated. If the bolts are not seated and/or the parts are still loose,
remove the bolts, spacer, and reinforcement plate and bottom tap the crankshaft holes.

5.

Reinstall the crankshaft spacer, flexplate, reinforcement plate, and reinstall the flexplate attachment bolts.

PART NUMBER

PART NAME

F4TZ-6A366-A

Flywheel Reinforcement Plate

F81Z-6A366-AA

Crankcase Spacer

F4TZ-6A369-A

Engine Spacer

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 497000, 504000, 597997, 601300, 603300

A/T - 4R100 Flexplate Replacement Precaution|Page 5303 > < Single Cardan, Flange Yoke - Disassembly and Assembly|Page 5298