Econoline E450 V10-6.8L VIN S (1999)
4. Install the snap ring.
5. If equipped, install the speed control deactivator switch.
6. Install the brake master cylinder fluid control valve.
7. Install the brake master cylinder.
8. Fill the brake master cylinder reservoir with High-Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting Ford
specification ESA-M6C25-A and install the brake master cylinder filler cap.
9. Bleed the brake master cylinder.
Removal and Installation
Removal
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
