Econoline E550 V10-6.8L VIN S (2003)
5. Tighten the front bleeder screw.
6. Repeat Steps 2, 3 and 4 for the LH rear bleeder screw, the RH front disc brake caliper bleeder screw, and the LH front disc brake caliper bleeder
screw, in that order.
7. Connect the scan tool DCL cable adapter into the vehicle Data Link Connector (DLC) under the dash, and follow the scan tool instructions.
8. Repeat the system bleed procedure as outlined in Steps 1 through 5.
Caliper
1. NOTE: It is not necessary to do a complete brake system bleed if only the disc brake caliper was disconnected.
Place a box end wrench on the disc brake caliper bleeder screw. Attach a rubber drain tube to the disc brake caliper bleeder screw, and submerge
the free end of the tube in a container partially filled with clean brake fluid.
2. Have an assistant pump the Brake Pedal (BP) and then hold firm pressure on the brake pedal.
