Econoline E550 V10-6.8L VIN S (2003)
3. Install the suction accumulator/drier.
1
Install the suction accumulator/drier.
2
Install the screws.
4. Connect the A/C cycling switch electrical connector.
5. Connect the evaporator discharge line.
^
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Connect the compressor suction line.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
