Econoline E550 V10-6.8L VIN S (2003)
3. Disconnect and plug the heater water hoses.
4. Disconnect the refrigerant line spring lock couplings.
5. If equipped, remove the third, fourth and fifth bench seats as required.
6. If equipped, remove the trim panels.
^
Remove the LH center bolster trim panel.
^
Remove the quarter trim rear upper panel.
^
Remove the lower rear body side trim panel.
7. Remove the heater air plenum chamber.
1
Remove the screw.
2
Remove the heater air plenum chamber.
8. Remove the air conditioning and heater assembly.
1
Remove the screws.