Econoline E550 V10-6.8L VIN S (2003)
4. Remove the front safety belt retractor.
1
Use the Safety Belt Bolt Torx Bit to remove the bolt.
2
Remove the front safety belt retractor.
5. On the driver side, remove the front safety belt anchor.
1
Use the Safety Belt Bolt Torx Bit to remove the bolt.
2
Remove the front safety belt anchor.
6. On the passenger side, remove the front door scuff plate, the center body pillar upper trim panel and the center body pillar lower trim panel.
7. Remove the front safety belt retractor and the front safety belt anchor.
1
Use the Safety Belt Bolt Torx Bit to remove the retractor bolt.
2
Remove the front safety belt retractor.
3
Use the Safety Belt Bolt Torx Bit to remove the anchor bolt.
4
Remove the front safety belt anchor.
INSTALLATION
