Econoline E550 V10-6.8L VIN S (2003)
6. Remove the bearing retainer.
7. Remove the bearing and the gear.
-
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
INSTALLATION
1. NOTE: Use a new ignition switch lock cylinder.
To install, reverse the removal procedure.
-
Verify ignition switch lock cylinder operation.
2. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) reactivation procedure.
Reactivate the supplemental restraint system (SRS).