ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Bleeding|Service and Repair|Page 5517 > < Front Steering Knuckle|Service and Repair|Page 5512
Page 1
background image

Power Steering Bleeding: Service and Repair

Power Steering System Purging 

Special Tools

Special Tool(s) 

CAUTION:  If the air is not purged from the power steering system correctly, premature power steering pump failure could result. This condition can
occur on pre-delivery vehicles with evidence of aerated fluid on vehicles that have had steering component repairs.

1. NOTE:  A whine heard from the power steering pump may be caused by air in the system. The power steering purge procedure must be performed

prior to any component repair for which power steering noise complaints are accompanied by evidence of aerated fluid.

Remove the reservoir cap. Check the fluid.
^

Use Motorcraft MERCON Multi-Purpose ATF XT-2-QDX or MERCON equivalent.

2. Tightly insert the stopper of the vacuum pump into the reservoir.
3. Start the vehicle.

Power Steering Bleeding|Service and Repair|Page 5517 > < Front Steering Knuckle|Service and Repair|Page 5512