Econoline E550 V10-6.8L VIN S (2003)
11. Using a press and the special tool, press the pinion bearing until it is firmly seated on the pinion and pinion shim.
12. Place a new drive pinion collapsible spacer on the pinion shaft against the pinion stem shoulder.
13. CAUTION: Installation without the correct tool can result in early seal failure. If the rear axle drive pinion seal becomes cocked during
installation, remove it and install a new one.
Install the outer pinion bearing cone and roller, the rear axle drive pinion shaft oil slinger and the rear axle drive pinion seal.
