Econoline E550 V10-6.8L VIN S (2003)
Front Door Window Motor: Service and Repair
MOTOR - WINDOW REGULATOR ELECTRIC DRIVE
Heavy Duty Riverter
SPECIAL TOOL(S)
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim panel.
3. Disconnect the electrical connector.
4. NOTE: Use care not to enlarge the sheet metal holes in the door inner panel.
Remove the center pins from the rivets, using a drift. Using a 1/4-inch diameter drill, drill out the rivets attaching the window regulator electric
drive bracket to the inner panel.