Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
5. Repeat Steps 2, 3 and 4 for the LH rear bleeder screw, the RH front disc brake caliper bleeder screw, and the LH front disc brake caliper bleeder
screw, in that order.
6. Connect the scan tool DCL cable adapter into the vehicle data link connector (DLC) under the dash, and follow the scan tool instructions.
7. Repeat the system bleed procedure as outlined in Steps 1 through 5.
Hydro-Boost Bleeding
Hydro-Boost Bleeding
NOTE: The Hydro-Boost power brake booster is generally self-bleeding, and the following procedure will normally bleed the air from the power
brake booster. Normal operation of the vehicle will further remove any additional trapped air.
1. Fill the power steering oil reservoir with Motorcraft MERCON (R) ATF XT-2-QDX or -DDX or MERCON (R) equivalent.
2. Remove the powertrain control, module (PCM) relay to prevent the engine from starting.
3. Crank the engine for several seconds.
