Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Parking Brake Control: Service and Repair
Control
Removal
All Vehicles
1. Raise and support the vehicle.
All Except E-450
2. Relieve the tension on the parking brake system.
1
Pull down on the parking brake intermediate cable.
2
Insert a 4 mm (0.16 inch) drill bit or equivalent retainer in the parking brake control.
E-450
3. Disconnect the front parking brake cable and conduit from the parking brake lever.
1
Disconnect the parking brake lever return spring from the clevis pin.
2
Remove the locking pin from the clevis pin and remove the clevis pin.
All Vehicles
4. Lower the vehicle.
5. Remove the LH cowl side trim panel.