Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
2. Install the oil cooler front header.
1
Position the front header gasket, and place the front header against the engine.
2
Install the front header mounting bolts. a Do not tighten the bolts at this time.
3. Install the oil cooler rear header.
1
Position the rear header gasket, and place the rear header against the engine.
2
Install the rear header mounting bolts.
4. Tighten the oil cooler front header bolt.
5. Connect the block heater.
6. Install the oil filter.
7. Lower the vehicle.
8. Fill the radiator.
9. Check and fill the engine oil.
10. Start the engine and check for leaks.