ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Standard A/C|Page 6024 > < Standard A/C
Page 2
background image

6. Disconnect the A/C cycling switch electrical connector.

7. Remove the suction accumulator/drier.

1

Remove the screws.

2

Remove the suction accumulator/drier.

8. Remove the A/C cycling switch.

INSTALLATION

1. Service the new suction accumulator/drier with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA

(Motorcraft YN-12-C), or equivalent meeting Ford specification WSH-M1C231-B.

2. Install the A/C cycling switch.

^

Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or
equivalent meeting Ford specification WSH-M1C231-B.

Standard A/C|Page 6024 > < Standard A/C